• Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/

Picked up another project

That's good to hear. I don't much diesel knowledge for high horsepower building. My kid (37yoa) essentially said what you say here. Makes me feel better. Yes, he's already scrounging for items, putting feelers out.
He got the boat and trailer for free; but he's going to have to do some fab work for Curtis in the future.
 
waybomb said:
That's good to hear. I don't much diesel knowledge for high horsepower building. My kid (37yoa) essentially said what you say here. Makes me feel better. Yes, he's already scrounging for items, putting feelers out.
He got the boat and trailer for free; but he's going to have to do some fab work for Curtis in the future. One
Click to expand...
It’s not real expensive either, but in your case I see a 5k-7k compound turbo setup and 3k or so for the injector for each one. Everything else is pretty straight forward. As boat engines, you can also take advantage of water to air inter coolers. If I remember correctly your son has some pretty good fabrication skills that will come in handy on a project like that.
 
IMG_2789.jpeg
IMG_2790.jpeg
IMG_2791.jpeg
IMG_2792.jpeg
 
I’m no stranger to going fast in a boat, this was my first whitewater marathon boat, 447” Donovan hemi alcohol injected and supercharged around 1600 hp, I gotta dig the pictures out, you can see the block peaking out in the third picture in the garage that went into the second boat, that engine was a 526” KB second gen. Hemi, injected alcohol with a 1471 blower, around 2000 hp. These were marathon boats that ran rivers during runoff in the mountains, like the Rogue in Oregon and the salmon in Idaho. Top speed around 120-130 depending on conditions. Now days unlimited class uses helicopter turbines. I started my own business and that was the end of all the racing. No time after that.
 
Nothing wrong with the 6.7 after the emissions crap is removed. It’s a bigger engine but a lot more expensive to put on a p7100 injection pump as it’s a common rail, with electrical fired injectors, I think you use 24 valve injectors and cross tubes to go to a mechanical injection pump. Then there is availability and cost.
 
m1west said:
Nothing wrong with the 6.7 after the emissions crap is removed. It’s a bigger engine but a lot more expensive to put on a p7100 injection pump as it’s a common rail, with electrical fired injectors, I think you use 24 valve injectors and cross tubes to go to a mechanical injection pump. Then there is availability and cost.
Click to expand...
Son is talking with D&J about this. He suggested the 6.7 for the boat motors. With a powerglide behind them to keep the rpms down.
 
Powerglide final is still 1:1 and with the torque they make you don’t need a 2 speed, my thought on that is it’s just something else to break. Only benefit from where I sit is reverse.
 
A glide will take a lot of power, and you have plenty of cold water to keep it cool so if it’s cheaper than the appropriate crash box, why not.
 
After thinking about it for a minute, I think a used Lenco with reverser would be stronger than the glide and probably cheaper too. Go to racingjunk.com
 
The injection pump showed up today, tomorrow after chores I have a job walk, so may or may not work on it, Saturday I have a family outing, so maybe Sunday I can get back on it. This time I’m doing all the modifications on the bench incase somthing else shows it’s ugly head.
 
You must log in or register to reply here.
Top