• Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/

Picked up another project

IMG_2475.jpeg
IMG_2476.jpeg
IMG_2478.jpeg
 
tied up lifters
Cam out
Changed front cover to a p pump cover, nice casting, but quality control didn’t see a bunch of casting flash I had to knock off.
Put the cam back in with assembly lube on everything.
Tomorrow, head bolts out studs in
 
Push rods showed up, im going to powder coat the valve cover, the lifter galley cover and maybe the injector lines the color I’m going to paint the truck, which is Area 51. So until the new lifter valley cover shows up I’m kinda on hold. I can’t install the injectors because you kinda tighten up the injector hold down while you tighten the injector line on the cross tubes so everything aligns and seats. Can’t install the injector pump or push rods and rockers until the injectors are in. So I’m in a holding pattern for now on it.
 
You must log in or register to reply here.
Top