Grouser ID?

[vintagebike]

Found these in a cat purchased last year. What are they? 32" x 1 1/4 square tube.

 

[vintagebike]

Someone must know what these fit. I have 7 of the one style and 1 with ice cleats. They look to have not been used and still are mostly primer with a bit of rust.

 

[mkntrakes]

4T Thiokol

 

[vintagebike]

My 4T10 has 28" grousers

 

[mkntrakes]

So do bolt holes line up? could b 4vl or even just a wider version

 

[Loneoutrider]

Look like grousers for a Thiokol 4T N ( narrow chassis). Let me get measurements for hole spacing off mine.
My 4T8 has a traction bar that is two square tubes, but the one you have would work just as well. The others
would be standard grousers.

 

[Loneoutrider]

Measured the grousers on my 4T8.
32 inches across and 1 1/4 square tube
Bolt hole spacing from end is
1st hole 1 1/2”
2nd hole 3 1/2”
3rd hole 6 1/2”
4th hole 8 3/4”
5th hole 11”
5th holes from each end are 9 3/4” apart
Note that the tire guides have rounded shoulders like the pictures from vintagebike!

I found a listing under Thiokol parts on eBay for grousers for either an Imp or a Sprite that are different length
and different tire guides.

vintagebike If you are interested in parting with those, let me know!

 

[Loneoutrider]

Thought I would throw in a picture of my Masters! One Trackmaster and one Snow Master!

 

[vintagebike]

Personal reply letter sent. ?

 

[Snowtrac Nome]

i would have to mesure mine but they look like light foot grouser.

 

[Yancey]

If you still have these track grousers, I would be interested. This is the type used on my old 4Vl. You can call me at 307-321-2546