I need the axle pivot trunion pin for a 1983 500 series. On my machine the trunion is on the rear 5th wheel assembly. I have the trunion pin from the early 500 series I had for parts but it was in the front on the earlier models and although similar, it is not the same. I still have the 5th wheels from the early model for sale. If you have a trunion pin for sale, please send me a private message with info. Thanks ahead of time.
-
Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/
WANTED; Tucker trunion pin
- Thread starter muley180
- Start date
Here are the pictures of the trunion pin I am looking for. The forward end is the pivot for the rear 5th wheel, the 2 journals fit in the trunion hanger, the threaded portion is for end play adjustment and the far end fits into the guide block. Thanks.
Attachments
Swamp Cruizer
New member
Muley, If that part is keeping you from using your machine, I would have someone v it out and weld it. It may hold forever, but at least until you could find a used one. or I'm thinking a machine shop could cut out the section between the journals, bore them half way through, press in a new shaft section and weld it to the journals. I'm guessing you could get that done for a couple hundred dollars. I'm blessed to have a good machine shop here in town. If you run out of options, send it to me and I can have them look at it.
Cruizer
Cruizer