• Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/

Wanted: Track Guards for Bombardier SV252 Skidozer

U

undy

New member
I need to replace several track guards on a SV-252. The tracks are 29" wide, and the guards measure 12" long. Who sells such items?

Thanks,
Paul
 
Thanks Boggie. I tried to search for the answer, but I guess I'm too old to get it right. I appreciate your help. I'll call them tomorrow.
 
Is it possible to straighten bent track guards? I've got a couple dozen which are bent. I'd rather fix them than replace them, if possible.

Are they hardened?

Any advice is welcome.
 
take them off , get out torch, heat them up and bend them back into shape, I have had no issues with one that have been straightened , may have to reweld any ones that welds break, if they are broken anywhere tire runs or sprocket touches throw them away, I have seen many sprockets screwed up trying to save a few dollars
 
i did the same thing with some of my snow trac guides also some had holes worn in to them i covered them with som metal and mig welded them in so far i havn't got in to my private reserve but the time is comming
 
Thanks guys. I assumed they could be straightened.

Are they hardened, and do I need to temper them after heating?
 
FYI I got my replacements from Minn. Outdoors (Boggie) for less than $16 each. They had round bolt holes instead of square for carriage bolts, but I just got some hex-heads and they worked great.
 
You must log in or register to reply here.
Top