-
Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/
sv302 questions
- Thread starter 72 widow
- Start date
They both operate the band brakes...
The long manual sticks do it the hard way, the short flip ups at the front edge of the seat do the same as the manuals do, only with hydrolic power. Be sure you check the rear end lube, as some may still have Dextron or ATF in them. Not good. John Deere J20C is one of the hydrolic oils thats works pretty well. In our clubs 252, we cut the manual levers off, for more room for the operator....and use the short sticks or ram steer with the drag on occasion.
Regards, Kirk
The long manual sticks do it the hard way, the short flip ups at the front edge of the seat do the same as the manuals do, only with hydrolic power. Be sure you check the rear end lube, as some may still have Dextron or ATF in them. Not good. John Deere J20C is one of the hydrolic oils thats works pretty well. In our clubs 252, we cut the manual levers off, for more room for the operator....and use the short sticks or ram steer with the drag on occasion.
Regards, Kirk
72,
Boogie, a member here at Minn. Outdoors has parts for your machine. Send him a PM you need. If you look around the snow cat forum a bit you may find his posts, then click on his handle. From the page you bring up click on contact info and you will then be able to leave him a message. Or do a search for his handle...
Narrow tracks tells me you have sumer tracks, steel cleats like 31" wide? Tall grass that is not mowed should be no problem, but stay away from short or mowed grass. "rounded cleats" I am not familiar with, so cann't really say. At any rate it will be tough on the grass, tough enough not sure why anyone would do this to an area that they mow. Plus it may detrack on such surface.....don't want that. Now is the time to get it ready for snow!
Regards, Kirk
Boogie, a member here at Minn. Outdoors has parts for your machine. Send him a PM you need. If you look around the snow cat forum a bit you may find his posts, then click on his handle. From the page you bring up click on contact info and you will then be able to leave him a message. Or do a search for his handle...
Narrow tracks tells me you have sumer tracks, steel cleats like 31" wide? Tall grass that is not mowed should be no problem, but stay away from short or mowed grass. "rounded cleats" I am not familiar with, so cann't really say. At any rate it will be tough on the grass, tough enough not sure why anyone would do this to an area that they mow. Plus it may detrack on such surface.....don't want that. Now is the time to get it ready for snow!
Regards, Kirk