Porsche industrial part number?

[vintagebike]

Does anyone out there have access to a parts manual for the Porsche 1600 industrial motor? I'm looking for the part number for the seal that goes between the carburetor mount/runner and the intake manifold on both sides. RTV gasket maker is just not right.

 

[300 H and H]

If your unable to find the part, Gasket paper and a small ball peen hammer pencil and scissors come into play.
I know what you mean about RTV goop.

 

[vintagebike]

The paper flat gaskets are easy to find. It is two of these rubber seals, about 45mm in outside diameter, that are the challenge.

 

[vintagebike]

A friend that owns a vintage Porsche parts company came up with a part number for the seals needed on our Porsche 356/SnowTrac project. Maybe you have 2? Porsche #539-08-308

 

[chowderman]

in stock?

https://www.ecstuning.com/b-genuine-porsche-parts/o-ring/53908308/

O-RING - Genuine Porsche

Porsche Original - O-RING

www.vertexauto.com

listed as 'special order' . . .

 

[vintagebike]

unfortunately, I tried but Porsche cannot fill that part number order

 

[BoyToys]

Would be very interesting to stuff something like my Porsche 930 turbo engine in there!

 

[300 H and H]

unfortunately, I tried but Porsche cannot fill that part number order

Do you have a Caterpillar dealer near you?
They have huge selection of O ring seals. If you take one of the originals or specs of a new one, my bet is that they might
have a suitable one on hand.