• Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/

broken grousers

JimVT

JimVT

Bronze Member
GOLD Site Supporter
I picked up a snow trac lasts spring ST4 #185. I had several broken grousers on it . I found 5 so far. All my spares have been used and I am wanting to know how they break. Is it from rocks and uneven ground? From reading and talking to people it is hard to break the ones on this model. They are not rusted out or worn down lots .
jim
 
JimVT said:
I picked up a snow trac lasts spring ST4 #185. I had several broken grousers on it . I found 5 so far. All my spares have been used and I am wanting to know how they break. Is it from rocks and uneven ground? From reading and talking to people it is hard to break the ones on this model. They are not rusted out or worn down lots .
jim
Click to expand...
i'm betting they were run accross large rocks like a river bed that terrain is the top of my list of things to stay away from
 
Does anyony know of any new grousers that are for sale? Been welding the better ones and used up all but one of my new ones.
Lyndon was over and told me of a guy but I couldn't contact him.
Jim
 
look ive got an old track and am going to get some out to krc here in shortly shipping to you will be a killer because i'm not gooing to dismount a track but i could cut out a section
 
Thanks,don but I am going to wait on the grousers for now. I think I'll run it this season and see what happens.
I gave a shot at welding the thin aluminum panels .This is the fuel tank hole with a patch cut to fit in it. I seen one small pin hole but figured my paint would cover it.
Jim
DSC03578.jpg
 
i just scored about brand new groousere and guides don't know if i want to let something like those go though i still have a butloatd of used ones good job on the fuel filler hole
 
Lyndon told me the last pirce on the grousers were 12 to $20 about 10 yrs ago.
I have one unused one for a pattern that I tucked away.
Got them all welded that were broke , Seven on one track. then noticed A few have really worn sproket holes in them.
 
You must log in or register to reply here.
Top