• Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/

prinotht4s

mdenton

New member
recently rescued prinoth t4s from the crusher.starts,runs well,blade functions. what makes this thing move forward and reverse
 
The controls on my T4 have been modified.
I do not have a steering wheel. So the switches that should be on the
steering wheel have been relocated. If you still have the wheel, there
should be a push button on the upper left end of the wheel. That is S24, the
reverse driving switch. Bring the vehicle to a stop, then push the button.
My reverse switch is now mounted on the floor under my left foot. Looks
like a headlight high/low beam switch out of a car from the 50's or 60's.


Here is a picture of the control switches--

S16 is the Driving Permission Switch-free running
Should light up when switched on
S17 Switch authorizing operation of attachments
Warning Light H17 is switched on when in Reverse Driving.
When you press the Reverse button, S24, the rear attachment is raised
automatically while the tiller and the vibrators stop operating.
The reverse buzzer starts sounding, the warning lamp lights up (H17), and
the rear-mounted lights are switched on automatically.

Hope this helps.

Ralph
 

Attachments

  • Snowcat Dash.jpg
    Snowcat Dash.jpg
    87.9 KB · Views: 1,098
i do have small pushbutton on left top of wheel and dial on left of coluum that says grnd speed. safe to assume that is track speed? switch has power and switches like forward and rev. also this is approx 1996 machine our instrument panels look different. did not mention all switches are unreadable ,machine has 10000 hrs.what does pedal on floor left side of coluum do . seems like some kind of hyd valve.and finally can theese lockouts be overidden mechanically or electricaly? in case i have sirious electric issues. thankyou very much
 
more ammo for something simple like the old snow tracs or tuckers too much electronics on the new machines and cars who needs a machine that wipes your a$$ for you too i just need to get from point a to point b warm and in one piece
 
These pages should help you figure out what the switches and warning
lights are supposed to do.
In my next posting I will try to show you how to manually raise and lower
the cab and engine cover.

Ralph
 

Attachments

  • Controls013.jpg
    Controls013.jpg
    128.1 KB · Views: 1,242
  • img005.jpg
    img005.jpg
    164.4 KB · Views: 1,261
  • img006.jpg
    img006.jpg
    178.3 KB · Views: 1,260
  • img007.jpg
    img007.jpg
    173.9 KB · Views: 1,225
  • img012.jpg
    img012.jpg
    116.4 KB · Views: 1,345
thankyou very much luv2weld unfortunately the s is a totally different beast.ironicaly enough the pics that pixie posted are the machines i have 2 t4 and the back shot of t4s is mine. there were 3 t4 one got crushed . R.I.P.other 2 are within 10 miles and are available for parts or whole
 
On the passenger side of the vehicle, under the edge of the engine cover,
you will see a handle. It is resting against the radiator.
Lift it just a little (so it clears the clip that is holding
it in place) and pivot it out toward you. You will see that it is attached
to the manual hydraulic pump as in picture 1.
The little lever is shown as position a or b. With the lever in position a,
if you operate the handle up and down (provided there is hydraulic oil
in the system) you will be able to raise the engine cover. Picture number 4
shows how to lock the engine cover safety device in the raised position.
If you move the lever to b position, operate the manual pump, you will
raise (tilt), the cab. Picture 2 shows how to lock the safety device for the
cab.
If you unlock the engine cover safety device, and have the engine running,
you can use switch S15 (as shown in picture 3) to raise and lower the engine
cover.

This should ease a lot of the frustration you were feeling. When you can't
read the labels on the switches, it's like being blind!!!

Ralph
 

Attachments

thanks for all the help. learned alot .desparetly need t4s cluster info. found prinoth dealer on east coast.hope to have manuals soon. hope 55cans chimes in. thanks again everone think thnow
 
thanks for all the help. learned alot .desparetly need t4s cluster info. found prinoth dealer on east coast.hope to have manuals soon. hope 55cans chimes in. thanks again everone think thnow

Sorry for the late reply and PM, I haven't been online for awhile. I have some t4s info I could send your way.

Hi Ralph. Still intend on sending some stuff to you. Been busy, have 3 T4s and one T4 going, been busy running from machine to machine to keep them going. They are a few hours apart, so it takes time traveling around. Acquired three non-running T4's for parts ... was a good move ... helped out lots so far.
 
thankyou 55 cans for responding. need computer lower board burnt. capaciters popped off plus plus plus.when jump where capaciters were can make sprockets inch foward.DO YOU HAVE USED COMPUTER.? 1996 T4S HOW MUCH? THANKS MIKE
 
thankyou 55 cans for responding. need computer lower board burnt. capaciters popped off plus plus plus.when jump where capaciters were can make sprockets inch foward.DO YOU HAVE USED COMPUTER.? 1996 T4S HOW MUCH? THANKS MIKE

I don't have a used computer for the T4S, mine like Ralph's are converted to mechanical controls (levers) that operate servos for the track motors. In this configuation the computer doesn't do much other than terminate wiring (lol).

I have a bit of info on computer adjustments and external wiring diagrams for the T4S that I can scan and email you, PM me ur email.

On the www.prinoth.com website there is a download section, it'll ask you to register first, then you can access a T4SR maintenace and parts manual, it's got a lot of useful information, such as switch, relay and fuse positions.
 
Hey, 55cans, welcome back!

Acquired three non-running T4's for parts

When I was a kid, we all knew who the rich guys were, cause they had 3 cars up on blocks in their yard. :whistling:

Ralph
 
Hi there ..
have a small ski resort in GREECE
And we have a πρινοτη Τ4S so i found the publications of you about the T4 so i interesting to find the manual back of the hydraulic transmissions.

Respect

jim
 
hey
Dimitrios or JIM. Wellcame to the Forum.:smile:
Which part of Greece is that small Ski resort.
NorthWEST, NorthCentral, in Central, or in South Greece?

Regards
Nikos - Florina NorthWest Greece.
 
hey
Dimitrios or JIM. Wellcame to the Forum.:smile:
Which part of Greece is that small Ski resort.
NorthWEST, NorthCentral, in Central, or in South Greece?

Regards
Nikos - Florina NorthWest Greece.


Hello Nic

Mainalo ski mount

Last moment too fix the T4S it’s a long story about it :sad:


jim
 
Wellcome Jim.
Jim lives in South Greece in a place close to Mountain Mainalo, called Tripoli of Greece. There is also Tripoli in Libya -Kantafi etc.
The weather in Tripoli of Greece, it is look like Florina. I ve been in Tripoli in 1991 as i was in military airport - Air Base, for 3 and half months.

SO Jim, You must Know that, In this Forum we need Fotos.

Is that your Prinoth T4s ?
 

Attachments

  • prinoth t4s.jpg
    prinoth t4s.jpg
    152.4 KB · Views: 527
I am glad that we learn that HAVE come over to MAinalo mount.

in particular, it has now been sold and this section of foto is at the bottom of the mountain.

there is the T4S and you see in next foto the height of the snow thrown 2012 season.

phiomegatauomicrongammarhoalphaphi3AF0alpha11_zps05308f87.jpg


phiomegatauomicrongammarhoalphaphi3AF0alpha12_zps804abe03.jpg
 
Jim,
I have been told the the T4 and the T4S are completely different.
I don't know because I have never worked on a T4S.

I can send you the information you need about the T4, but it may be
different from your machine.

If you give me your email address I will send it to you.

Your question was about the transmission??
Do you want all of the information about the steering system?
Or just the information on the hydraulic motors that move the tracks??

My email address is luv2weld at hughes.net
Take out the extra spaces and change the at to @.

Ralph
 
Jim try this.
There is a company in Grecce "MONTE NOULIKAS" in Ski resort Development.
http://www.montenoulikas.gr/gr/edra/edra.htm.

E-mail: monte@montenoulikas.gr

Try to find the guy Thanasis or Sakis. He works in the repair department.
He knows everything about the Italian company Prinoth.



ΠΡΟΜΗΘΕΙΑ ΕΡΠΥΣΤΡΙΟΦΟΡΩΝ ΟΧΗΜΑΤΩΝ
ΚΑΙ ΧΙΟΝΟΣΤΡΩΤΗΡΩΝ
A/A ΧΙΟΝΟΔΡΟΜΙΚΟ ΚΕΝΤΡΟ ΤΥΠΟΣ
57 ΔΕΗ 11 οχήματα PRINOTH HUSKY με ρυμουλκό (τρέϊλορ)
56 Χιονοδρομικό Κέντρο Τρία - Πέντε Πηγάδια Νάουσας PRINOTH T4S
55 Χιονοδρομικό Κέντρο KOZUF - FYROM PRINOTH EVEREST
54 Χιονοδρομικό Κέντρο KOZUF - FYROM PRINOTH EVEREST με βίντσι
53 Χιονοδρομικό Κέντρο Ζήρειας LEITNER LH 420
52 Χιονοδρομικό Κέντρο Τρία - Πέντε Πηγάδια Νάουσας PRINOTH EVEREST με βίντσι
51 DIONIS TEQJA - ΑΛΒΑΝΙΑ PRINOTH T4
50 Βυζοβίτης Ευάγγελος PRINOTH HUSKY με καμπίνα
49 ΔΕΗ 5 οχήματα PRINOTH HUSKY με μαχαίρι και καμπίνα
48 Χιονοδρομικό Κέντρο Παρνασσού PRINOTH EVEREST με βίντσι

47 Χιονοδρομικό Κέντρο Μαινάλου PRINOTH T4S με βίντσι

46 Χιονοδρομικό Κέντρο Βασιλίτσας LEITNER LH 420
45 Δήμος Βυτίνας PRINOTH T2
44 Χιονοδρομικό Κέντρο Βίγλας PRINOTH T4S
43 Χιονοδρομικό Κέντρο Ζήρειας PRINOTH ALL
42 Χιονοδρομικό Κέντρο ΒΟΡΑΣ PRINOTH T4S
41 Χιονοδρομικό Κέντρο Ελατοχωρίου LEITNER LH 420
40 ΑΣΗΜΟΠΟΥΛΟΣ ΝΙΚΟΣ (ΚΑΛΑΒΡΥΤΑ) PRINOTH T3
39 Χιονοδρομικό Κέντρο Παρνασσού PRINOTH T4SR με καλάθι
38 Χιονοδρομικό Κέντρο Παρνασσού PRINOTH HUSKY με καμπίνα
37 ΠΑΝΟΥ ΕΠΕ PRINOTH HUSKY
36 Χιονοδρομικό Κέντρο Παναγίτσας Έδεσσας PRINOTH BIG

34 Χιονοδρομικό Κέντρο Φαλακρού Δράμας LEITNER LH 420
33 Χιονοδρομικό Κέντρο Τρία - Πέντε Πηγάδια Νάουσας LEITNER LH 400
32 Χιονοδρομικό Κέντρο Περτουλίου LEITNER LH 400
31 Χιονοδρομικό Κέντρο Φαλακρού Δράμας PRINOTH T4SR
30 Χιονοδρομικό Κέντρο Καρπενησίου PRINOTH Τ4SR
29 Χιονοδρομικό Κέντρο Σελίου PRINOTH Τ4
28 Χιονοδρομικό Κέντρο Καλαβρύτων PRINOTH Τ4 με εργάτη
27 Χιονοδρομικό Κέντρο Βασιλίτσας Γρεβενών PRINOTH Τ4S
26 Χιονοδρομικό Κέντρο Βασιλίτσας Γρεβενών PRINOTH Τ4S με εργάτη
25 Χιονοδρομικό Κέντρο Βίγλας - Φλώρινα LEITNER LH 400
24 Χιονοδρομικό Κέντρο Βόρας - Καϊμάκτσαλαν PRINOTH Τ4S
23 Χιονοδρομικό Κέντρο Σελίου PRINOTH Τ4
22 Χιονοδρομικό Κέντρο Πηλίου PRINOTH Τ4
21 Χιονοδρομικό Κέντρο Παρνασσού PRINOTH Τ4S
20 Χιονοδρομικό Κέντρο Παρνασσού PRINOTH Τ4S
19 Χιονοδρομικό Κέντρο Καρδίτσας PRINOTH Τ4
18 Χιονοδρομικό Κέντρο Ελατοχωρίου Πιερίας PRINOTH ΤC
17 Χιονοδρομικό Κέντρο Βόρας - Καϊμάκτσαλαν PRINOTH Τ4
16 Χιονοδρομικό Κέντρο Τριπόλεως PRINOTH BIG
15 Χιονοδρομικό Κέντρο Σελίου PRINOTH Τ4
14 Χιονοδρομικό Κέντρο Λαϊλιά Σερρών PRINOTH Τ4
13 Χιονοδρομικό Κέντρο Καλαβρύτων PRINOTH Τ4
12 Χιονοδρομικό Κέντρο Περτουλίου Τρικάλων PRINOTH Τ2
11 Χιονοδρομικό Κέντρο Βίγλας - Φλώρινα PRINOTH Τ4
10 Χιονοδρομικό Κέντρο Τρία - Πέντε Πηγάδια Νάουσας PRINOTH Τ4
9 Χιονοδρομικό Κέντρο Βασιλίτσας Γρεβενών PRINOTH "200"
8 Χιονοδρομικό Κέντρο Βίτσι - Καστοριά PRINOTH "200"
7 Χιονοδρομικό Κέντρο Καλαβρύτων PRINOTH "200"
6 Δήμος Ανωγείων - Χιονοδρομικό Κέντρο Ψηλορείτη PRINOTH Τ3
5 Χιονοδρομικό Κέντρο Σελίου PRINOTH Τ3
4 Χιονοδρομικό Κέντρο Καλαβρύτων PRINOTH JUNIOR

2 Χιονοδρομικό Κέντρο Βόλου PRINOTH SUPER JUNIOR
1 Χιονοδρομικό Κέντρο Καρπενησίου PRINOTH BIG


Regards Nikos.
 
Hi there ..
have a small ski resort in GREECE
And we have a πρινοτη Τ4S so i found the publications of you about the T4 so i interesting to find the manual back of the hydraulic transmissions.

Respect

jim

What do you need? Info for the pumps, drive motors? Can scan and email, pm me an email for you.
 
Nikos

I know about Noulika so i try in web too find the manuals
We try to do a few things our only τοο save extra some money...

Thanks guys for the help

jim:wink:
 
i need the info for pumps drive rear system too change the hydraulic oil and others instructions

jim

Happy New Year, sorry for the delay. I sent you a first file tonight. Have a look over it and let me know if you need more detail.

If I send you additional, to make it easier for me, the files will be called "unique name"_front.pdf and "unique name"_rear.pdf. The pages are double sided and it would be too much time for me to photocopy the rear before a scan. You'll have to print the files and then reorder the pages. Okay?

Good luck.
 
Top